366 8 bus series specifications see table next page polarization n- normal, w and x (see table next page) description ?high level rfi / emi ?rear removable contacts ?two contact layouts - shell 22 : 9 standard contacts + 4 bus - shell 24 : 41 standard contacts + 2 bus characteristics mechanical ?shell : aluminum alloy ?insulator : thermoset ?contacts : copper alloy ?vibrations : 10 to 20 000 hz, acceleration 20g ?shock : 100g, 6ms electrical ?withstanding voltage : 1500 vrms max ?current rating : 7,5 a ?insulation resistance : 5000 m ? ?contact resistance : # 20 contact : 4 m ? bifilar inner contact : 4 m ? ?contact bifilar impedance at 3 ghz - between central contacts : 68 ? - between central contacts and shielding of the bifilar contact : 42 ? climatic ?temperature range : - 55? to +125? ?endurance : 500 operations ?sealing : immersion at low pressure : 33 mbar ?resistance to salt spray : 48 hours ?damp heat : 21 days or 10 cycles according to mil-std 202 method 106 applications bifilar bus lines for multiplex transmission standards derivated from mil-c 26482 series ii nfc 93422 he 312 83723 serie i p- male contact s- female contact bifilar shielded contacts 4 - shell 22 2 - shell 24 contacts # 20 09 - shell 22 41 - shell 24 shell size 22 or 24 - (plug 9 c : shell 22 only) r- backnut c- cable clamp o- supplied without backshell 0- square flange receptacle (backnut or straight backshell) 6- plug with backnut or straight backshell 8- plug with elbow backshell 7- jam nut receptacle (backnut or straight backshell) 9- flange mounted plug with ?wist pull?backshell basic series 8 bus 0 r 22 - 09 4 s n ordering information
367 8 bus series male set 8532- 0 10 8532- 0 06 8532- 0 16 8526-1348 8522-2349 a contact central 8630-162 8630-162 8630-162 female set 8532- 0 11 8532- 0 07 8532- 0 17 8526-1344 8520-292 contact central 8630-629 8630-629 8630-629 cable acceptance 0,21 to 0,60 mm 2 0,38 to 0,93 mm 2 reducing sleeve 8522-2142 cable acceptance with reducing sleeve 0,09 to 0,21 mm 2 over insulation (max) 5,2 mm 3,8 mm 4,6 mm 0,98 to 2,11 mm dummy contact 8532-148 8532-148 filler plug 8522-389a shell 22 30 142 shell 24 90 225 bus contact for fileca cable 2709/12 without spec. 031 032 shell 22 supplied with 2 bus contacts for fileca wire 2709/12 and 2 dummy contacts 001 041 042 large barrel size 20 contacts and bus contacts for fileca 2709/12 cable 008 039 040 shell 22 supplied with 2 bus contacts for fileca wire 2709/12 and 2 dummy contacts + # 20 large barrel contacts 009 050 051 bus contact for fileca 2709/3 cable 200 231 232 shell 22 supplied with 2 bus contacts for fileca 2709/3 cable and 2 dummy contacts 201 241 242 bus contact for fileca 2709/3 cable + # 20 large barrel contacts 208 239 240 shell 22 supplied with 2 bus contacts for fileca 2709/3 cable and 2 dummy contacts + # 20 large barrel contacts 209 250 251 bus contact for fileca 2709/9 cable 300 331 332 shell 22 supplied with 2 bus contacts for fileca 2709/9 cable and 2 dummy contacts 301 341 342 bus contact for fileca 2709/9 cable + # 20 large barrel contacts 308 339 340 shell 22 supplied with 2 bus contacts for fileca 2709/9 cable and 2 dummy contacts + # 20 large barrel contacts 309 350 351 delivery without contact l 031 l 032 l specifications contact layouts viewed from front face of male insulator polarization part numbers plating olive green black yellow cadmium anodized cadmium shell 22 9 contacts # 20 4 shielded bifilar contacts wx shell 24 41 contacts # 20 2 shielded bifilar contacts bus contacts # 20 contacts fileca fileca fileca standard specific small large 2709/12 2709/3 2709/9 barrel barrel main key way main key way cable type
368 8 bus series dimensions square flange receptacle 0 type square flange receptacle with backnut 22 35 36.2 40 16.5 1.378 1.425 1.575 .650 24 38.2 39.4 43.2 16.5 1.504 1.551 1.701 .650 shell a max b max c max d max square flange receptacle with straight cable clamp 22 39 31.3 23.9 1.535 1.232 .941 24 42.7 31.3 27 1.681 1.232 1.063 shell b max d max g max panel cut-out 22 37.7 31.75 1.484 1.250 24 41 34.92 1.614 1.375 shell h j 0.083 32.4 max 1.276 2.8 max 0.110 1.909 7.2 0.283 0.217 2.12 max 48.5 max max mounting on front panel mounting on rear panel max 5.5 bt 22 : 3.5/ 0.138 bt 24 : 4/ 0.157
369 8 bus series jam nut receptacle 7 type receptacle with backnut 22 34.95 36.33 49.43 14.5 52.6 42.9 1.376 1.430 1.946 .571 2.071 1.689 24 38.12 39.48 52.6 14.5 55.75 46.2 1.501 1.554 2.071 .571 2.195 1.819 shell a b c d e f max max max max square flange receptacle with straight cable clamp 22 39 29.3 23.9 1.535 1.154 .941 24 42.7 29.3 27 1.681 1.154 1.063 shell b max d max g max panel cut-out 22 38.4 36.8 1.512 1.449 24 41.5 39.9 1.634 1.571 shell h j 0.077 1.276 0.110 2.087 0.157 1.95 max 32.4 max 4 max 53 max 2.8 max e a b f sur plats
370 8 bus series plug with backnut plug with straight cable clamp plug 6 type 22 65.6 31.9 23.9 2.583 1.256 .941 24 68.6 33.4 27 2.701 1.315 1.063 shell c max m max g max 22 41.8 39 5 7 23.9 1.646 1.535 .197 .276 .941 24 45.1 42.7 5 7 27 1.776 1.681 .197 .276 1.063 shell kldd g max max max max max plug 8 type (only with elbow cable clamp backshell) 0.110 1.303 1.886 33.1 max 2.8 max 47.9 max.
371 8 bus series designation part numbers designation part numbers ?wist pull?plug 9 type 22 56.7 39 28.95 23.9 47.55 2.232 1.535 1.140 .941 1.872 shell a b c d max min endurance : 250 operations caps plating g : olive green cadmium r : black anodized j : yellow cadmium 22 852 - 27 g 22 - 26 24 852 - 27 g 24 - 26 shell part number 22 852 - 29 g 22 - 26 24 852 - 29 g 24 - 26 shell part number 22 852 - 28 g 22 - 26 24 852 - 28 g 24 - 26 shell part number cap for 0 type receptacle cap for 7 type receptacle cap for 6 and 8 type plug ?crimping tool - ms 3191.1 (fci souriau 8465) ?locator - p 20319.2 for central contacts - for bus contacts - ms 3191.20a for 20 size standard contacts (small or large barrel) ?crimping tool - m 22520/2.01 (fci souriau 8476.01) ?locator - m 22520/2.08 (fci souriau 8630.83) for central contacts of bus contacts - m 22520/2.02 (fci souriau 8476.02) for standard contacts size 20 (except large barrel) ?tightening support 8500.30 ?tightening pliers 8498.03 jaws 8500.1015 (order 2 jaws) ?insertion, extraction contacts tool for size 20 contacts 8522.20 ?tooling for bifilar contacts 8532.101 (for tighten the body of bus contacts) ?extraction tool for bus contacts 8532.01 tooling shell size 22-24 plating g- olive green cadmium a- black anodized j- yellow cadmium backshell type 01 - backnut 02 - straight cable clamp 03 - elbow cable clamp basic series 852 - 01 g 22 backshell - ordering information 6.299 cable acceptance cable clamp to the ordered separately : pn : 8525-873 a 4.331 6.024 6.024
|
